|Rated Input||20 W (Max. 30 W)|
|Rated Impedance||100 V line: 500 Ω (20 W), 1 kΩ (10 W)|
|Sound Pressure Level||93 dB (1 W, 1 m)|
|Frequency Response||150 Hz – 10 kHz|
|Speaker Component||12 cm cone-type × 4|
|Water Protection||IPX3 equivalent|
|Finish||Enclosure: Extruded aluminum, silver gray, fully-glazed, baked paint
Grille: Punched aluminum net, black, matte, baked paint
Mounting bracket: Steel plate, silver gray, fully-glazed, baked paint
|Dimensions||167 (W) × 580 (H) × 141 (D) mm|
|Weight||5.1 kg (unit only), 5.7 kg (including mounting bracket)|
|Accessory||Mounting bracket …2, Mounting bolt, washer, packing …1 set|
A drainage hole is provided on the speaker cable side of the cabinet.
When installing the speaker outdoor, make sure that its speaker cable side faces the ground.
The speaker must be installed upright or facing down.
Installing the speaker in any other position may rendor the drainage hole ineffective, eventually leading to an electrical failure or other damage.