Hệ thống VX_2000 là một giả pháp cao với chi phí thấp cho việc phát thanh và thông báo quảng bá. Hệ thống có tối đa 50 vùng loa.
Nhà Phân Phối Thiết Bị Âm Thanh Minh Anh: Hơn 12 năm kinh nghiệm cung cấp và lắp đặt thiết bị âm thanh . Cam kết giá gốc có CO/CQ. Ưu đãi 10% cho các dự án. Bảo hành 2 năm . Tư Vấn Hỗ trợ lắp đặt MIỄN PHÍ. ---> gọi : 0909.993.802 ( Ms. Nhi ).
Hệ thống được thiết kế linh hoạt cho phép sử dụng ở các môi trường và đáp ứng được nhiều yêu cầu khác nhau. Dễ dàng vận hành và mở rộng cấu hình tùy theo nhu cầu. Hệ thống là tập hợp các modul giúp cho việc đáp ứng các nhu cầu 1 cách nhanh chóng thuận lợi. Tùy vào các nhu cầu mà sử dụng các modul khác nhau. Hệ thống VX_2000 là một giả pháp cao với chi phí thấp cho việc phát thanh và thông báo quảng bá. Hệ thống có tối đa 50 vùng loa.
Micro thông báo khẩn cấp là 1 bộ phận thông thường trong hệ thống giúp cho việc vận hành hệ thống nhanh chóng thuận lợi khi có trường hợp khẩn cấp. Khi trường hợp CPU không hoạt động thì micro thông báo báo khẩn cấp vẫn sử dụng bình thường.
Hệ thống có thể được vận hành thông qua các micro ở các vị trí khác nhau. Mỗi 1 micro sẽ được thiết lập quyền ưu tiên khác nhau, micro thông báo khẩn cấp được thiết lập quyền ưu tiên mà các micro khác không thấy được.
Sự giám sát sẽ không bị gián đoạn như các thông báo thông thường hay nhạc nền.
Khi trường hượp khẩn cấp được kích hoạt, hệ thống sẽ thông báo các bản thông báo dựa trên thiết bị lưu trữ thông báo sẵn.
Hệ thống nguồn dự phòng linh hoạt giúp cho hệ thống không bị gián đoạn.
RM-200XF là một chiếc micro chuyên dụng cho hệ thống VX-2000. RM-200XF được thiết kế chuyên dùng để phát thông báo trong các trường hợp khẩn cấp, tuy nhiên nó cũng có thể được sử dụng cho các thông báo thông thường.
Có thể gắn được 9 đơn vị mở rông RM-210.
Hệ thống VX-2000 có thể kết nối tối đa 4 RM-200XF.
Có thể sử dụng ngay cả khi CPU không hoạt động giúp cho việc thông báo khẩn cấp không bị gián đoạn.
Hiển thị được thông báo lỗi khi bộ điều khiển trung tâm VX-2000 phát hiện lỗi( Gồm cả lỗi điều khiển và lỗi tín hiệu).
Thông số kỹ thuật:
Power Source | 24 V DC (operating range: 16 – 40 V DC) |
Current Consumption | 200 mA or less (RM-200XF), 850 mA (with 10 RM-210s connected) |
Audio Output | 0 dB*, 600 Ω, balanced |
Hand-Held Microphone | Dynamic microphone, Function switch (default: Press-to-talk), Microphone element fault detection |
Distortion | 1 % or less |
Frequency Response | 200 Hz – 15 kHz |
S/N Ratio | 55 dB or more |
Internal Monitor Speaker | 200 mW |
Volume Control | Microphone volume control, Monitor speaker volume control |
Number of Function Keys | 5 (including Hand-held microphone’s switch), extendable up to 105 (with 9 RM-210s connected) |
Key Extension | 10 keys extension per RM-210, EXTENSION connector |
Number of Connectable Units | 4 |
Communication System | LONWORKS Twisted Pair Free Topology Transceiver |
Connection Cable and Connector | Category 5 STP cable, plug-in screw connector |
Communication Distance | 500 m (Free topology wiring) |
Finish | ABS resin, blueish gray (PANTONE 538 or its equivalent) |
Dimensions | 200 (W) × 215 (H) × 82.5 (D) mm (excluding the coiled cord) |
Weight | 1.2 kg |
Accessory | Plug-in screw terminal…1, Wall mounting bracket…1, Wall mounting screw…2, Box mounting screw…2 |
Applicable Box | YS-11A |
RM-200X là micro chuyên dung cho hệ thống VX-2000 để phát các thông báo thông dụng.
Có thể gắn được 9 đơn vị mở rông RM-210.
Hệ thống VX-2000 có thể kết nối tối đa 8 RM-200X.
Thông số kỹ thuật:
Power Source | 24 V DC (operating range: 16 – 40 V DC), supplied from RJ45 connector or power input jack (non-polarity type) Usable power input plug: 5.5 mm outer diameter, 2.1 mm inner diameter, and 9.5 mm long. |
Current Consumption | Under 200 mA (RM-200X), 750 mA (with 9 RM-210s connected) |
Audio Output | 0 dB*, 600 Ω, balanced, RJ45 connector |
Gooseneck Microphone | Unidirectional electret condenser microphone |
External Microphone Input | -40 dB*, 2.2 kΩ, unbalanced, mini jack, phantom powering |
Distortion | Under 1% |
Frequency Response | 100 – 20,000 Hz |
S/N Ratio | Over 60 dB |
Internal Monitor Speaker | 200 mW |
Volume Control | Microphone volume control, Monitor speaker volume control |
Number of Function Keys | 15, extendable up to 105 (with 9 RM-210s connected) |
Key Extension | 10 keys extension per RM-210, EXTENSION connector |
Number of Connectable Units | 8 (include RM-200XF) |
Communication System | LONWORKS Twisted Pair Free Topology Transceiver |
Connection Cable and Connector | Category 5 STP cable, RJ45 connector |
Communication Distance | 500 m (Free topology wiring) |
Finish | ABS resin, blueish gray (PANTONE 538 or its equivalent) |
Dimensions | 190 (W) × 76.5 (H) × 215 (D) mm (gooseneck microphone excluded) |
Weight | 850 g |
RM-210 là phần mở rộng các phím điều khiển cho các micro RM-200XF và RM-200X.
Thông số kỹ thuật:
Current Consumption | 20 mA max. (in terms of RM-200M’s DC power input) 75 mA max. (in terms of DC power inputs of RM-200X and RM-200XF) 80 mA max. (in terms of DC power inputs of RM-200SA and RM-200SF) |
Connection | Connection by way of dedicated cable |
Number of Function Keys | 10 |
Finish | ABS resin, blueish gray (PANTONE 538 or its equivalent) |
Dimensions | 110 (W) × 76.5 (H) × 215 (D) mm |
Weight | 350 g |
Accessory | Extension cable ……1, Linkage bracket A ……2, Linkage bracket B ……1, Screw for linkage bracket ……12 |
Applicable Unit (option) | RM-200M, RM-200SA, RM-200SF, RM-200X, RM-200XF |
VX-2000 System Manager là một ma trận đơn vị đầu vào mà chỉ định tín hiệu đầu vào đến 4 bus âm thanh, và các chức năng như điều khiển chính hệ thống VX-2000.
Tổng cộng có đến 8 modul VX-200XI, VX-200XR, và 900 Series đầu vào âm thanh có thể được gắn trong một hệ thống quản lý VX-2000.
Hệ thống VX-2000 có thể kiểm soát định tuyến tín hiệu âm thanh, ưu tiên, và thiết bị ngoại vi, trong khi các thiết lập kiểm soát đầu vào và đầu ra được thực hiện bằng cách kết nối với máy tính.
Thông số kỹ thuật:
Power Source | 24 V DC (operating range: 20 – 40 V DC) M3.5 screw terminal, distance between barriers: 8.8 mm |
Current Consumption | Under 650 mA (20 V DC) |
Input | -20 dB*, unbalanced, Number of module slots:8 Usable module: VX-200XR, VX-200XI, 900 series plug-in modules (M-01F, M-01M, M-01P, M-01S, M-01T, M-03P, M-51F, M-51S, M-51T, M-61F, M-61S, M-61T, U-01F, U-01P, U-01R, U-01S, U-01T, U-03R, U-03S, U-61S, U-61T) |
Audio Link Output | Number of audio buses: 4 0 dB*, electronically balanced, RJ45 female connector Twisted-pair straight cable (TIA/EIA-568A standard) |
Monitor Output | 0 dB*, electronically balanced, XLR receptacle (3 pins) |
Frequency Response | 20 Hz – 20 kHz |
S/N Ratio | Over 60 dB |
Distortion | Under 0.5 % |
Cross Talk | Under -60 dB (1 kHz, 0 dB*) |
Control Input | 16 inputs, no-voltage make contact, open voltage: 17 V DC, short circuit current: Under 5 mA, RJ45 connector × 2 |
Control Output | 16 outputs, open collector output, withstand voltage: 30 V DC, control current: Under 5 mA, RJ45 connector × 2 |
Chime Tone | Built-in chime: 4-tone chime (up)/4-tone chime (down)/2-tone chime/Gong |
Communication System | PC (Setting software to be installed): D-sub connector (9 pins), cross cable, RS-232C VX-2000SF: RJ45 female connector, Twisted-pair straight cable (TIA/EIA-568A standard), LONWORKS RS-485 |
Operating Temperature | 0 ℃ to 40 ℃ |
Finish | Panel: Surface-treated steel plate, black, 30 % gloss, paint |
Dimensions | 482 (W) × 132.6 (H) × 337 (D) mm |
Weight | 6.4 kg |
Accessory | Rack mounting bracket (preinstalled on the unit)…2, Rack mounting screw…4, Fiber washer…4, Blank panel…7, Blank panel mounting screw…14, Setting software installation CD…1, Fuse (T1.6 A L)…1, Fuse (T6.3 A L)…1 |
Option | Voice announcement board: EV-200M, Isolation transformer: IT-450 (audio link output) |
Khung giám sát VX-2000SF Frame là ma trận đầu ra phần của hệ thống VX-2000.
VX-2000SF làm nhiệm vụ chuyển các tín hiệu âm thanh tới các zone.
Nó có thể được mở rộng lên đến 5 đơn vị.
Mỗi đơn vị có thể gắn tối đa 10 modul đầu ra.
Có 4 loại sau đây có thể được sử dụng: VX-200SP modul giám sát thông qua tín hiệu âm tần, VX-200SZ modul giám sát thông qua trở kháng, VX-200SI modul điều khiển đầu vào VX-200SO modul điều khiển đầu ra.
Thông số kỹ thuật:
Power Source | 24 V DC (operating range: 20 – 40 V DC) M3.5 screw terminal, distance between barriers: 8.8 mm |
Current Consumption | Under 2 A (40 V DC) |
Number of Module Slot | 10, usable modules: VX-200SZ, VX-200SP, VX-200SI, VX-200SO |
Frequency Response | 20 – 20,000 Hz |
Signal to Noise Ratio | Over 60 dB |
Distortion | Under 0.5% |
Cross Talk | Under -60 dB (1 kHz, 0 dB*) |
Audio Link Input/Output | Number of audio busses: 4 0 dB*, electronically balanced, RJ45 female connector Twisted-pair straight cable (TIA/EIA-586A standard) |
Standby Amplifier Link | RJ45 female connector for connecting the VP-2064, VP-2122, VP-2241, VP-2421 Power Amplifier. Twisted-pair straight cable (TIA/EIA-586A standard) |
Communication System | VX-2000, VX-2000SF: RJ45 female connector × 2, LONWORKS RS-485 VX-2000DS: RJ45 female connector × 2, Twisted-pair straight cable (TIA/EIA-586A standard) |
Operating Temperature | 0℃ to 40℃ |
Finish | Panel: Surface-treated steel plate, black, 30% gloss, paint |
Dimensions | 482 (W) × 132.6 (H) × 337 (D) mm |
Weight | 5.6 kg |
Accessory | Rack mounting screw……4, Fiber washer……4, Blank panel……9, Rack mounting bracket (preinstalled on the unit) ……2, Standby amp. cable (3 m) ……1, Blank panel mounting screw……18 |
Option | Isolation transformer: IT-450 (audio link output) |
Nguồn khẩn cấp VX-2000DS cung cấp nguồn điện 24V cho các thiết bị trong hệ thống VX-2000 thông qua kết nối với thiết bị cung cấp ddienj VX-200PS
Mổi một VX-2000DS có thể kết nối với 2 acquy 12V.
Khi có điện nguồn VX-2000 sẽ sử dụng điện 24V được cung cấp từ VX-200PS và sạc điện cho acquy. Khi mất điện nguồn VX-2000DS sẽ tự động chuyển sang dung điện 24V được cung cấp từ acquy giúp hệ thống vẫn chạy bình thường.
Thông số kỹ thuật:
Power Source | 230 V AC, 50/60 Hz |
Power Consumption | 240 W max. |
Applicable Battery | Panasonic LC-X1265PG/APG (65 Ah) |
Charging Method | Trickle charging |
Charging Current | 5 A max. |
Charging Output Voltage | 27.3 V ±0.3 V (at 25 ℃ (77 ゜F)) Temperature correction coefficient: -40 mV/℃ |
Power Supply Input | 6 M4 screw terminal, distance between barriers: 11 mm (0.43″) |
DC Power Output | 6 (25 A max. each) M4 screw terminal, distance between barriers: 11 mm (0.43″) |
Control Connector | RJ45 female connector for connecting the VX-2000SF Surveillance Frame. Twisted-pair straight cable (TIA/EIA-568A standard) Type of control signal: Battery check, AC power status, DC power status, charging circuit failure, and battery failure |
Battery Connection | 1 pair of positive and negative terminals Applicable cable diameter: AWG 6 – AWG 1/0 (Line resistance within 4 mΩ/total) |
Operating Temperature | 0 ℃ to 40 ℃ (32 ゜F to 104 ゜F) |
Finish | Panel: Surface-treated steel plate, black, 30 % gloss, paint |
Dimensions | 482 (W) × 88.4 (H) × 377.6 (D) mm (18.98″ × 3.48″ × 14.87″) |
Weight | 10.5 kg (23.15 lb) |
Accessory | Rack mounting screw …4, Fiber washer …4, Blade fuse (40 A) …3, Fuse (T3.15 A L) …1, Power cord (2 m (1.65 ft)) …1, Insulating sheet …1, Attention label (German) …1, Fastener hook …4, Fastener loop …4 Sticker (Declaration of compliance) …1 |
Fuse Rating | Blade fuse (40 A), Blade fuse (7.5 A), Fuse (T3.15 A) |
Internal Resistance | Maximum internal resistance of the battery and its associated circuitry, Ri max: 50 mΩ |
Current Specification | Maximum output current draw from the battery: 43.5 A Rated maximum continuous output current, I max a: 43.5 A Rated maximum short duration output current, I max b: 43.5 A Rated minimum output current, I min: 0 A |
Cable Specification | Recommended cable parameter for DS-SF Link: Twisted-pair straight cable (TIA/EIA-568A standard) |
VX-200PS là thiết bị cung cấp nguồn cho hệ thống.
Có 2 kênh DC đầu ra cho mỗi thiết bị.
Thông số kỹ thuật:
Power Source | 230 V AC, 50/60 Hz |
Power Consumption | 580 W |
PS OUT | Rated output: 210 W (29 V, 7.25 A) × 2 Peak output: 400 W × 2 M4 screw terminal, distance between barriers: 11 mm |
Operating Temperature | 0℃ to 40℃ |
Applicable Frame | VX-2000PF |
Finish | Surface-treated steel plate |
Dimensions | 135 (W) × 118.2 (H) × 333.8 (D) mm |
Weight | 13.2 kg |
Accessory | Fuse (T3.15 A L) ……1, Power cable ……1 |
VX-2000PF cho phép 3 thiết bị VX-200PS đựng vào trong.
Thông số kỹ thuật:
Finish | Panel: Surface-treated steel plate, black, 30% gloss, paint |
Dimensions | 483 (W) × 132.6 (H) × 324.8 (D) mm |
Weight | 5.5 kg |
Product Composition | Side panel ……2, Chassis ……1, Front panel ……1 |
Accessory | Rack mounting screw ……4, Fiber washer ……4 |
Usable Unit | VX-200PS (up to 3) |
VP-2421 là âm ly cung cấp 1 kênh công suất 420W.
Sử dụng modul VP-200VX.
Thông số kỹ thuật:
Power Source | 28 V DC (operating range: 20 – 40 V DC) M4 screw terminal, distance between barriers: 12 mm |
Current Consumption | 7.6 A (EN60065) |
Rated Output Power | 420 W (at min. resistive and max. capasitive load) |
Output Power (at AC Mains: 195.5 V) | 320 W (at min. resistive and max. capasitive load) |
Output Voltage | 100 V (70 V, 50 V: selectable by internal wiring change) |
Minimum Resistive Load | 24 Ω (at 100 V), 12 Ω (at 70 V), 6 Ω (at 50 V) |
Maximum Capacitive Load | 0.5 μF (at 100 V), 1 μF (at 70 V), 1 μF (at 50 V) |
Number of Channels | 1 |
Input | Specified by input module VP-200VX |
Number of Module Slots | 1, usable module: VP-200VX |
Output | Power amplifier output (speaker line): M3.5 screw terminal, distance between barriers: 8.8 mm |
Frequency Response | 40 Hz – 16 kHz, ±3 dB (at 1/3 rated output) |
Distortion | 1 % or less (at rated output, 1 kHz) |
S/N Ratio | 80 dB or more |
Panel Indicator | Channel power indicator: 1 channels, dual colour LED Overheat indicator: Yellow LED |
Operating Temperature | 0 ℃ to 40 ℃ |
Finish | Panel: Surface-treated steel plate, black, 30 % gloss, paint |
Dimensions | 482 (W) × 88.4 (H) × 340.5 (D) mm |
Weight | 9.5 kg |
Accessory | Rack mounting screw…4, Fiber washer…4 |
VP-2421 là âm ly cung cấp 1 kênh công suất 240W.
Sử dụng modul VP-200VX
Thông số kỹ thuật:
Power Source | 28 V DC (operating range: 20 – 40 V DC) M4 screw terminal, distance between barriers: 12 mm |
Current Consumption | 4.8 A (EN60065) |
Rated Output Power | 240 W (at min. resistive and max. capasitive load) |
Output Power (at AC Mains: 195.5 V) | 180 W (at min. resistive and max. capasitive load) |
Output Voltage | 100 V (70 V, 50 V: selectable by internal wiring change) |
Minimum Resistive Load | 41 Ω (at 100 V), 21 Ω (at 70 V), 10 Ω (at 50 V) |
Maximum Capacitive Load | 0.5 μF (at 100 V), 1 μF (at 70 V), 1 μF (at 50 V) |
Number of Channels | 1 |
Input | Specified by input module VP-200VX |
Number of Module Slots | 1, usable module: VP-200VX |
Output | Power amplifier output (speaker line): M3.5 screw terminal, distance between barriers: 8.8 mm |
Frequency Response | 40 Hz – 16 kHz, ±3 dB (at 1/3 rated output) |
Distortion | 1 % or less (at rated output, 1 kHz) |
S/N Ratio | 80 dB or more |
Panel Indicator | Channel power indicator: 1 channels, dual colour LED Overheat indicator: Yellow LED |
Operating Temperature | 0 ℃ to 40 ℃ |
Finish | Panel: Surface-treated steel plate, black, 30 % gloss, paint |
Dimensions | 482 (W) × 88.4 (H) × 340.5 (D) mm |
Weight | 8.1 kg |
Accessory | Rack mounting screw…4, Fiber washer…4 |
VP-2122 là âm ly cung cấp 2 kênh công suất 120W.
Sử dụng modul VP-200VX.
Thông số kỹ thuật:
Power Source | 28 V DC (operating range: 20 – 40 V DC) M4 screw terminal, distance between barriers: 12 mm |
Current Consumption | 4.8 A in total (EN60065) |
Rated Output Power | 120 W × 2 (at min. resistive and max. capasitive load) |
Output Power (at AC Mains: 195.5 V) | 90 W × 2 (at min. resistive and max. capasitive load) |
Output Voltage | 100 V (70 V, 50 V: selectable by internal wiring change) |
Minimum Resistive Load | 83 Ω (at 100 V), 41 Ω (at 70 V), 21 Ω (at 50 V) |
Maximum Capacitive Load | 0.25 μF (at 100 V), 0.5 μF (at 70 V), 1 μF (at 50 V) |
Number of Channels | 2 |
Input | Specified by input module VP-200VX |
Number of Module Slots | 2, usable module: VP-200VX |
Output | Power amplifier output (speaker line): M3.5 screw terminal, distance between barriers: 8.8 mm |
Frequency Response | 40 Hz – 16 kHz, ±3 dB (at 1/3 rated output) |
Distortion | 1 % or less (at rated output, 1 kHz) |
S/N Ratio | 80 dB or more |
Panel Indicator | Channel power indicator: 2 channels, dual colour LED Overheat indicator: Yellow LED |
Operating Temperature | 0 ℃ to 40 ℃ |
Finish | Panel: Surface-treated steel plate, black, 30 % gloss, paint |
Dimensions | 482 (W) × 88.4 (H) × 340.5 (D) mm |
Weight | 9.1 kg |
Accessory | Rack mounting screw…4, Fiber washer…4 |
VP-2064 là âm ly cung cấp 4 kênh công suất 60W.
Sử dụng modul VP-200VX.
Thông số kỹ thuật:
Power Source | 28 V DC (operating range: 20 – 40 V DC) M4 screw terminal, distance between barriers: 12 mm |
Current Consumption | 4.8 A in total (EN60065) |
Rated Output Power | 60 W × 4 (at min. resistive and max. capasitive load) |
Output Power (at AC Mains: 195.5 V) | 45 W × 4 (at min. resistive and max. capasitive load) |
Output Voltage | 100 V (70 V, 50 V: selectable by internal wiring change) |
Minimum Resistive Load | 167 Ω (at 100 V), 83 Ω (at 70 V), 41 Ω (at 50 V) |
Maximum Capacitive Load | 0.125 μF (at 100 V), 0.25 μF (at 70 V), 0.5 μF (at 50 V) |
Number of Channels | 4 |
Input | Specified by input module VP-200VX |
Number of Module Slots | 4, usable module: VP-200VX |
Output | Power amplifier output (speaker line): M3.5 screw terminal, distance between barriers: 8.8 mm |
Frequency Response | 40 Hz – 16 kHz, ±3 dB (at 1/3 rated output) |
Distortion | 1 % or less (at rated output, 1 kHz) |
S/N Ratio | 80 dB or more |
Panel Indicator | Channel power indicator: 4 channels, dual colour LED Overheat indicator: Yellow LED |
Operating Temperature | 0 ℃ to 40 ℃ |
Finish | Panel: Surface-treated steel plate, black, 30 % gloss, paint |
Dimensions | 482 (W) × 88.4 (H) × 340.5 (D) mm |
Weight | 11.2 kg |
Accessory | Rack mounting screw…4, Fiber washer…4 |
VP-200VX được thiết kế để gắn vào các âm ly VP-2064, VP-2122, VP-2241, VP-2421.
Thông số kỹ thuật:
Power Source | Supplied from VP-2064, VP-2122, VP-2241 or VP-2421 |
Current Consumption | 30 mA or less |
Power Amplifier Link | RJ45 female connector for connecting the VX-200SP, VX-200SZ Audio Output module, or SX-2100AO. Twisted-pair straight cable (TIA/EIA-568A standard) |
Finish | Panel: Surface-treated steel plate |
Dimensions | 88 (W) × 25.8 (H) × 53.2 (D) mm |
Weight | 50 g |
Applicable Model | VP-2064, VP-2122, VP-2241, VP-2421 |
EV-200M là bo mạch lưu và phát các thông báo ghi sẵn.
Nó được thiết kế để sử dụng với hệ thống VX-2000 và VM-2000.
Thông số kỹ thuật:
Power Source | 24 V DC, 0.2 A |
Power Consumption | 5 W |
Output | 0 dB* |
Frequency Response | 20 – 20,000 Hz (44.1 kHz sampling) 20 – 14,000 Hz (32 kHz sampling) |
Distortion | Under 0.3 % (44.1 kHz, recording method: Extremely High) |
Playback Mode | Single source playback |
No. of Playback Program | 8 programs |
Operating Temperature | 0℃ to 50℃ |
Operating Humidity | Under 90% RH (no condensation) |
Dimensions | 120 (W) × 18.6 (H) × 121 (D) mm |
Weight | 120 g |
Accessory | Mounting screw …2, CompactFlash card (128 MB, preinstalled on the unit) …1 |
Reviews
There are no reviews yet.